ATTENTION - Multiboards.us will not be shipping orders between August 12th thru August 19th. All orders placed during this time will be shipped in the order received when we return. Thank you!

ATTENTION - Multiboards.us will not be shipping orders between August 12th thru August 19th. All orders placed during this time will be shipped in the order received when we return. Thank you!

Illuminated 2 inch trackball for 60 in 1 PCB

35 USD

More Views

Illuminated 2 inch trackball for 60 in 1 PCB
$35.00

Availability: In stock

Trackball is an "Arcade Quality" trackball and will work with your Jamma 60 in 1 boards. The device will be automatically configured as soon as it is physically plugged into the Jamma board port (com1 or com2)


Automatically rotates between green and red


This is an excellent trackball for use with the 60 in 1 multigame units, very smooth operation.


Approximate Sizing - 



  • Length and Width: 3-13/16 Inches

  • Thickness: 1-3/4 Inches

  • Track Ball Size: 2.25 Inch Diameter (with ridge), harness included.

  • Bolt holes are slightly different from a Happ Trackball at 3 3/4" instead of 3 1/2"


Mounting hardware sold separately. Fits most control panels with a trackball cutout.


Notes:


The connector on this track ball is designed for the 60 in 1  PCB board only, if you are wiring to a 412 in 1 or other JAMMA board you will have to remove the connector and manually wire to the board. 

OR
Description

Details

Trackball is an "Arcade Quality" trackball and will work with your Jamma 60 in 1 boards. The device will be automatically configured as soon as it is physically plugged into the Jamma board port (com1 or com2)

Automatically rotates between green and red

This is an excellent trackball for use with the 60 in 1 multigame units, very smooth operation.

Approximate Sizing - 

  • Length and Width: 3-13/16 Inches
  • Thickness: 1-3/4 Inches
  • Track Ball Size: 2.25 Inch Diameter (with ridge), harness included.
  • Bolt holes are slightly different from a Happ Trackball at 3 3/4" instead of 3 1/2"

Mounting hardware sold separately. Fits most control panels with a trackball cutout.

Notes:

The connector on this track ball is designed for the 60 in 1  PCB board only, if you are wiring to a 412 in 1 or other JAMMA board you will have to remove the connector and manually wire to the board. 

Reviews